Authorized · Certified · Carolinas
Authorized DoorKing dealer, certified installer and integrator
360 Mobile Vision sells, installs, programs and services DoorKing for businesses across North and South Carolina — slide, swing and overhead gate operators, telephone and video entry and traffic control. Being the authorized dealer as well as the installer is what gets you genuine equipment, a valid warranty and a manufacturer support path when something needs escalating.
- DealerWe quote and supply genuine DoorKing equipment, licensing and subscriptions.
- InstallerOur own technicians run the cable, mount the hardware, set the software up and test it — not a subcontractor you have never met.
- IntegratorWe make it work with the cameras, doors, network and identity systems already in the building, rather than leaving you with two systems that do not talk.
- Still here afterwardsService, repair, expansion and takeover of systems somebody else installed. Emergency cover round the clock.
Gate operator and entry-system guide
A DoorKing gate project combines moving machinery, access control and entrapment protection. Operator selection must follow the gate, duty cycle, travel, wind load, site geometry and required safety devices rather than replacing a failed unit with the nearest model number.
Start with the system architecture
DoorKing product names describe parts of a solution, not the complete installed result. A responsible design also covers power, pathways, network, software or subscriptions, compatible accessories, integrations, environmental conditions, user administration, testing and long-term support. Those dependencies should be visible in the proposal instead of left for the field team to discover.
The product-family sections below summarize the principal choices represented on this site. Availability, model numbers, software packaging and regional support can change. Final selection is verified against current manufacturer documentation and the actual site before procurement.
New systems
Develop the architecture from measured conditions, operating requirements and a written acceptance plan.
Existing-system expansion
Inventory installed models, versions, licenses, capacity and support status before promising compatibility.
Phased migration
Separate reusable infrastructure from weak credentials, obsolete controllers, unsupported software and unreliable field devices.
Multi-site standards
Create repeatable naming, configuration, testing and handoff rules while preserving a survey for each location.
DoorKing Access Control, Readers and Electric Locks
This product-family guide addresses What this product family does, Products and decisions, Questions to answer before quoting.
- What this product family does
- Products and decisions
- Questions to answer before quoting
- Pedestrian door, vehicle gate or garage?
- Credential security and desired read range
- Fail-safe/fail-secure and free-egress sequence
- Controller capacity, power and monitoring inputs
- Who owns administration, backups, updates and recurring services?
- What must continue working during network, internet or power failure?
- Which opening, egress, accessibility and life-safety requirements apply?
- What training, documentation and preventive maintenance are required?
- DoorKing access control products
Open the detailed DoorKing Access Control, Readers and Electric Locks guide
DoorKing Slide, Swing and Overhead Gate Operators
This product-family guide addresses What this product family does, Products and decisions, Questions to answer before quoting.
- What this product family does
- Products and decisions
- Questions to answer before quoting
- Gate type, dimensions, weight and condition
- Cycles per day, opening speed and duty rating
- Entrapment zones and monitored safety-device layout
- Power, standby, emergency responder and manual-release requirements
- Who owns administration, backups, updates and recurring services?
- What must continue working during network, internet or power failure?
- Which opening, egress, accessibility and life-safety requirements apply?
- What training, documentation and preventive maintenance are required?
- DoorKing gate operators
Open the detailed DoorKing Slide, Swing and Overhead Gate Operators guide
DoorKing Entry System, Gate Operator and Access Control Product Guide
Review the current DoorKing Entry System, Gate Operator and Access Control Product Guide options, compatibility and lifecycle requirements before selecting equipment.
Open the detailed DoorKing Entry System, Gate Operator and Access Control Product Guide guide
DoorKing Telephone and Video Entry Systems
This product-family guide addresses What this product family does, Products and decisions, Questions to answer before quoting.
- What this product family does
- Products and decisions
- Questions to answer before quoting
- Resident/tenant count and turnover
- POTS, VoIP, cellular or internet communication path
- Number of gates/doors and elevator integration
- Visitor, delivery and property-staff workflow
- Who owns administration, backups, updates and recurring services?
- What must continue working during network, internet or power failure?
- Which opening, egress, accessibility and life-safety requirements apply?
- What training, documentation and preventive maintenance are required?
- DoorKing product documents
Open the detailed DoorKing Telephone and Video Entry Systems guide
DoorKing Traffic Control and Gate Safety Systems
This product-family guide addresses What this product family does, Products and decisions, Questions to answer before quoting.
- What this product family does
- Products and decisions
- Questions to answer before quoting
- Separate pedestrians from automated gate travel
- Document UL 325 device locations and test results
- Confirm snow, drainage, pavement and plow conditions
- Schedule preventive maintenance for the full gate—not only the operator
- Who owns administration, backups, updates and recurring services?
- What must continue working during network, internet or power failure?
- Which opening, egress, accessibility and life-safety requirements apply?
- What training, documentation and preventive maintenance are required?
- DoorKing gate operators
Open the detailed DoorKing Traffic Control and Gate Safety Systems guide
Decisions to document before ordering DoorKing
Use these questions to turn a feature discussion into an installable scope. Any item that remains unresolved should appear as an assumption, allowance or exclusion rather than becoming an undocumented field decision.
- Survey gate type, length, weight, balance, hinges or rollers, travel, grade, wind exposure and physical condition.
- Confirm operator class, duty cycle, speed, horsepower, voltage, heater, battery and manual-release requirements.
- Design monitored entrapment protection, vehicle detection, warning devices and emergency access for the complete travel area.
- Coordinate telephone entry, card or mobile access, radio controls, loops, intercom, fire access and property workflows.
- Document foundations, conduit, drainage, grounding, lightning protection, fencing and responsibilities shared with other trades.
- Test normal, obstruction, entrapment, power-loss, emergency and manual-operation scenarios before handoff.
Reuse, migration and lifecycle review
An existing system may contain a mix of serviceable field hardware and components that are no longer secure, supported or economical. Record model and serial information, firmware and application versions, active licenses, administrator access, backups, warranties, spare capacity and known faults. Test reused devices instead of assuming they work because they are present.
Compare continued support, partial modernization and replacement using lifecycle cost and operational risk. A lower initial price can be misleading if the client inherits unsupported software, weak credentials, subscription surprises, proprietary dependencies or an undocumented integration. The handoff should identify official support resources and state who owns updates, renewals, backups and recovery.
Project delivery and acceptance
1. Discovery
Define the operating problem, users, sites, critical areas, policies, existing assets and success criteria.
2. Field verification
Measure conditions, inspect infrastructure, photograph constraints and resolve responsibilities shared with other trades.
3. Design and deployment
Approve models, capacity, licensing, pathways, settings, integration ownership, test cases and the installation sequence.
4. Closeout
Resolve exceptions and provide labels, test records, versions, diagrams, backups, training and official support routes.
North and South Carolina projects are coordinated from Charlotte. Coverage and scheduling depend on the site count, scope, required trades, field conditions and support expectations.
DoorKing planning questions
Can existing equipment be reused?
Possibly. Reuse depends on exact models, condition, protocol, firmware, software support, capacity and the target security or performance level. A survey and supported compatibility check are required before reuse becomes part of the proposal.
How are product models selected?
Models are selected from the required function, site conditions, capacity, environment, integrations, lifecycle and current availability. A catalog feature alone is not a substitute for those design inputs.
Who manages software, subscriptions and updates?
The project scope should name the client and service responsibilities for accounts, licenses, renewals, backups, release review, maintenance windows and recovery. Software and firmware come only from official manufacturer resources.
What should be tested at handoff?
Acceptance should prove normal operation, invalid or exception behavior, loss of power or communications, alerts, integrations, user permissions, reporting and the owner’s ability to perform routine administration.
Can 360 Mobile Vision service an existing DoorKing system?
We can inventory the installed environment, identify deficiencies and evaluate repair, expansion, migration or replacement. Manufacturer entitlement, administrator access and current support status are confirmed during discovery.
Official product and lifecycle resources
Use current manufacturer-controlled documentation for model availability, software, firmware, compatibility and release notes. 360 Mobile Vision links to official resources and does not redistribute firmware files.
Build a site-specific DoorKing scope
Share the locations, quantities, existing models, required integrations, network or power constraints, desired schedule and support expectations. That information allows a focused survey and product-family comparison.
Related services, products and planning guides
Service Areas in North and South Carolina
Use the Service Areas in North and South Carolina guide to compare compatible equipment, integrations, deployment choices and lifecycle responsibilities related to this project.
DoorKing owner, administrator and buyer resources
Carolina clients can use the parent-company DKS knowledge center to prepare programming, gate, entry, maintenance or repair work.
Discuss DoorKing installation, maintenance or service
Detailed guides are maintained by 360TechnologyGroup.com, the parent-company knowledge center.
Official DoorKing software, firmware and support
Use the manufacturer links below for current software, firmware, release notes, manuals and technical resources. 360 Mobile Vision links directly to official manufacturer portals and does not copy or host firmware files.
Before installing an update: verify the exact model, region, hardware revision, current version, required intermediate releases, licensing or support entitlement, backup and rollback plan, integrations and maintenance window. An incorrect firmware package or upgrade sequence can interrupt service, invalidate compatibility or prevent a downgrade. Coordinate updates for monitored, life-safety-adjacent or business-critical systems with the system administrator and an authorized specialist.
Some resources require a customer, dealer, certified-technician or active-support login. Cloud-managed products may update automatically and may not provide a public firmware file.